Material: Premium Silicone Compound / Nomex® (Aramid) multi-ply
reinforcement, manufactured to SAE J20 standards. NOTE: Not intended for any fuel, oil or oil
by-products.
Operating Temperatures: -65°F to 500°F (-54°C to 260°C)
Operating Pressure: (insert link
here that goes to a chart that includes burst pressure also)
Use: Turbochargers, superchargers, intercoolers, air intakes and other
engine components
LUCKEY SAYS: Sometimes our standard length of 3.00 inch might be more
than you need for your application. With custom cuts, we can cut most couplers
shorter to a minimum of one inch up to the maximum of 22 inches from our meter
length sticks, and in increments between those two lengths.
LUCKEY TIP 1: Our “tip” to you is that we never charge for doing
custom cuts for you! However if you need quantities of hoses of special
lengths, we recommend you ask us to design and manufacture a hose for you in
the desired length for your unique application.
LUCKEY TIP 2: It’s best to use only high quality clamps such as
our 100% stainless steel clamps. Worm clamps and sharp edged T-Bolt clamps
should not be used on silicone hoses. Silicone expands and contracts with
temperature changes, thus any sharp edged clamps will cut into the soft
silicone over a period of time, which will destroy the silicone material and
can be the cause of air leaks.
To order custom cut straight hose, please email sales@hosetechniques.com detailing the ID, length and color of hose you are interested in. We aim to get back to you within one business day or sooner.